This information applies to Lock-Block(tm) products only. Other
blocks do not meet our strict dimensional tolerances and do not
lock together into a cohesive wall as well as Lock-Block(tm) units.
Using copy-cat blocks with Lock-Block(tm) engineering data could
result in wall failures.
| Size: |
29.5" x 29.5" x 59" (750mm x 750mm
x 1500mm) approx. 2.5' x 2.5' x 5' |
| Weight: |
1960 kg (4320 lbs.) |
| Clearance Around Key: |
1/2" (12mm). The chamfered corners
provide approximately 8 square inches of drainage area per block.
|
| Lift Provisions: |
A standard 7 strand steel loop
at top centre of each block. |
| Minimum Radius of Curvature:
|
23m (75') for walls one block thick.
|
| Surface Finish: |
Standard Grade: 1 full
surface without large blemishes
Utility: All faces may contain large surface blemishes
such as honeycomb, chips, etc.
Rock Faced: Insert granite with rustic trowel joints
Textured: Form casted pattern on up to 3 faces |
| Concrete Strength: |
Blocks are manufactured with return
concrete and strength levels will vary. Extra charges will be
quoted for guaranteed concrete strength, if required. |
| Average Placing Time: |
10 blocks per hour (bottom row),
20 blocks per hour (other rows), 60 blocks per hour, maximum
rate under ideal conditions. |
